A Few Plumbing and Heating Tips

There are a few general maintenance tips for plumbing and heating that you should keep in mind, as these can help you save money and avoid some major problems. Below are a few general tips you can keep in mind.

The first few maintenance tips that will be discussed will be related to heating. Below are a few heating tips you can follow if you want to get the most from your heating system.

Furnace And Boiler Clean Out

If you want to make sure that your boiler or old hot water tank is working the way it is supposed to be working, then you should consider having it cleaned out at least once per year. You should have a professional service company clean your furnace right before the heating season is about to start. A furnace or boiler service company will be able to thoroughly clean your system, and this will improve efficiency.

Change The Filters

You should change the filters in your central heating system when they need to be changed. The best piece of advice to keep in mind is to just check the filters at least once per month, or once every six weeks. Changing your filters can help you avoid costly furnace repair jobs that may need to be done in the future.

Service Your Furnace

Forced air furnaces are quite expensive to replace, as well as expensive to repair. This is why you should have your Vancouver furnace service done at least once per year, and you will also want to run it a few times about a month or two leading up to the heating season. This will allow you to make sure that it is running as it is supposed to be running.

There are just a few heating tips, but it does not matter whether you have a radiant heat system, central heating system or any other type of system, the important thing is to make sure you inspect them. Inspect the vents, the thermostat, the air flow and more, as this can help you discover potential problems.

Now let’s go over some plumbing tips you can keep in mind. Below are some useful tips for you to keep in mind.

Know Where Shutoff Valves Are

If your water pressure is higher than it’s supposed to be, and you want to inspect a few things, then know where all of the shutoff valves are. Knowing where these valves are could prevent unnecessary water damage. However, it is best to have a professional to check to see if your pressure is in working order, but you should still know where the valves are in the event a pipe breaks and a leak occurs.


Drain Tile Problems

You may have a problem with your drain tile and not even know it, as drain tiles are buried around the foundation of your home. Figuring out if you have a problem with one is often difficult to do, and this is another reason why you should contact a plumber. You could get these plumbers to check the drain tile and determine if there are any problems with it, and how to go about fixing any faulty plumbing issues.

Make Sure Pipes Are Insulated

The final tip you will want to keep in mind is to make sure that water pipes are well insulated. If pipes are not insulated, or well insulated, then they could end up freezing in the winter, which can end up costing you a lot of money.


If you suspect that you have plumbing and heating issues, then you should always call a professional to take care of it. Here is the contact details for a good one…

Shamrocks Plumbing and Heating
Phone: (250) 575-8138

1325 Elwyn Rd
Kelowna, BC V1X 5M9